Which should I go with?

[jbutlr]

Wheel are going to 18's all the way around.


or

[Vegas69]

Charcoal

[deuce_454]

charcoal... just realize that you will have a problem replicating that stance IRL... the rims are more like 20 inch, with 40 profile tires in that picture.. but it sure looks awesome

[jbutlr]

ya I know that stance is not going to happen and the wheels are not going to be that big but I am gong to try and get it close.

[Bad94]

I really like the darker color.

Car would look KILLER with those wheels.

[ProdigyCustoms]

The Gunmetal is so cool! And those are 18s on the charcoal chop. However, you will never get the car that low and tuck that much tire at driving height. But the size is pretty right. Keep in mind that a 335 / 30 / 18 is a bit under 26" tall. If you want to fill the opening a bit, 19s using a 345 / 30 / 19 are one inch taller then the 335 / 30 / 18. If you want to see one, Project EmptyNest runs a 345 / 30 / 19

Also, the charcoal wheel is a old school step lip, the silver wheel is a fat lip.

[COYBILT]

I would go with the charcoal color, it gives the car a mean look. good luck

[BallnRods]

Charcoal

you should setup a poll on this thread.

[Bowtieracing]

Originally Posted by ProdigyCustoms

The Gunmetal is so cool! And those are 18s on the charcoal chop. However, you will never get the car that low and tuck that much tire at driving height. But the size is pretty right. Keep in mind that a 335 / 30 / 18 is a bit under 26" tall. If you want to fill the opening a bit, 19s using a 345 / 30 / 19 are one inch taller then the 335 / 30 / 18. If you want to see one, Project EmptyNest runs a 345 / 30 / 19

Also, the charcoal wheel is a old school step lip, the silver wheel is a fat lip.

Frank is that "charcoal" wheel available in size 18" with old school stepped lip-wich is what i am looking for.

Allso what would be the correct match for 335 / 30 / 18 at front with 10" wheel ??

[vinz68]

Charcoal