I have been holding onto the car hoping that I would get to finish it and turn it in to my dream. But the shop is slammed, space is at a minimum and cash is needed to upgrade some things in the shop. The car is ready for bodywork, paint and suspension. All metal work is done and done right. Mike's customs cars did the sheetmetal replacement and there are tons of pics available at
http://www.mikescustomcars.com/proje...oj=CFletcher69 Car is minitubbed with DSE tubs and has every piece of sheetmetal replaced, I mean everything!!
Here is the specs!
-1969 Camaro Coupe, original X-55, 350/3 speed SS car, have title , vin, trim tag, hidden vins, etc. Two big boxes of original bolts, brackets, etc
$17,500
Call me @ 229-221-4690 or email at
[email protected]
-**Car has no suspension or subframe. Plans called for DSE front and rear so stock stuff was sold.
-Sheetmetal replaced-- All panels where stipped of original EDP coating, sprayed with bed liner on inner sides, and all panels are covered with PPG epoxy
-Both full Dynacorn quarters
-Dynacorn tail panel
-Dynacorn roof skin
-Dynacorn roof structure supports
-Goodmark outer fenders
-DSE mini tubs
-Goodmark one piece trunk pan
-Goodmark one piece full floor
-Mike's Custom cars full frame rails
-Goodmark rear filler
-NOS package tray
-Dynacorn full inner and outer Rockers
-dynacorn complete dash assembly
-Dynacorn complete firewall, with both tulip panels
-Goodmark cowl panel
-Goodmark RS front fenders and lowers
-Goodmark? inner front fenders
-Goodmark upper and lower front panels
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights, everything lights, hoses, pumps, etc all new mix of GM and aftermarket
-if it was available it was replaced. this is as new of a car as you can get