...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 10-23-2005, 07:13 PM
Patrick's Avatar
Patrick Patrick is offline
Senior Member
 
Join Date: Apr 2005
Location: Orlando, Florida
Posts: 105
Thanks: 0
Thanked 0 Times in 0 Posts
Default Need Help!!

My passenger side GW UCA is hitting the Upper Control Arm Mount. It appears that this mount is about 3/16" back on the subframe. The bolt holes are positioned correctly for alignment purposes but are offset in the mount..causing the rear of the control arm to hit.

The interference is so bad that it doesn't matter if is at full droop or not. The mount on the passenger side is set back about 3/16" when compared to the driver's side. The holes are drilled in the correct position..but since the mount is set back.. this causes the control arm to hit.

Any suggestions on a fix?
Attached Images
   
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net