Oval Silicone Connector For Holley Stealth Ram Throttle Body?

[Rick Giles]

Does anyone make a connector for an oval throttle body to connect 1 or 2 pipes running to twin intercoolers? And also an oval aluminum or stainless pipe?

[wedged]

You don't need an oval connector, a round one will work just fine. If you want to do some mock up before buying/trying random silicone connectors just go to a plumbing supply shop and grab a few rubber pipe connectors. If I remember correctly, a 5" diameter connector is what fit my cobra throttle body. The Holley should be close in size. I'm actually using the rubber coupler on my truck, but it's not pressurized....yet.

[Blown353]

Originally Posted by Rick Giles

Does anyone make a connector for an oval throttle body to connect 1 or 2 pipes running to twin intercoolers? And also an oval aluminum or stainless pipe?

Burns stainless makes ovalized stainless... but have your wallet ready.

http://www.burnsstainless.com/304ovalsstubing.aspx

As far as the silicone coupler, measure the circumference of the OD of the throttle body with a flexible tape measure, divide by pi and then you have the diameter of the round coupler you need to purchase; it will simply deform into an oval.

However, if you want a molded oval boot, that's tough... here's all I could find: http://www.sfxperformance.com/parts/SPT9791.htm

[Rick Giles]

Man this is an awesome website. Thanks guys! Guess I'm going all aluminum on the cold side of the turbo.