1969 camaro BBC parts Edelbrock fuel pump Performer RPM manifold headers 12in clutch

[mzavaro]

Hey Guys...so I found more stuff that I wanted to get rid of. These parts were all on my 396 Big Block, 69 camaro, and they're off now cause I switched to EFI. All were bolted on the car and the engine was never fired, never ran. Towed from shop to shop, getting interior done, body, etc... Here's a list of the parts and please feel free to call/text me about anything at 619-548-3489 or email me at [email protected] Thanks guys!

1. BBC exhaust manifold, stock ones, brand new!! I boughts these from Rick's 1st generation I think and they cost me more than $400. (ya, tell me about it, lol). First $200 can take them.

2. 12 inch Clutch and Flywheel for BBC, 396! was on a muncie 4spd m20. Bolted on, NEVER shifted or ran. Paid more than $350. First $250 takes it.

3. Edelbrock Endurashine Performer RPM Intake Manifold for single 4barrell carburator, BBC 396, 427, 454. Cost me almost $400 from Summit, $380 to be exact. Beautiful Manifold, shines like chrome. First $280 can take it.

4. Edelbrock Mechanical Performer RPM Fuel Pump with Steel braided lines! On my BBC, 396, 427, 454. Edelbrock Part no. edl-1722 from Summit. Cost is $99.75 from Summit. First $80 takes it WITH the steel braided lines.

Thanks and let me know if I can help you guys with anything!!

[mzavaro]

any offers? awaiting payment on the manifold!

[mzavaro]

The transmission for this clutch is in a previous listing. Check it out to get a package deal. It's a Muncie M20, and I believe its' a wide ratio!

[mzavaro]

Manifold sold....

Still have other parts....accepting offers! Thanks guys!

[mzavaro]

Still Have The Mechanical Fuel Pump And The Manifolds...everything Else Sold. Taking Offers!!