Hello, My name is Dan, I have been into cars all my life, dad has a # matching 1969 Z/28, Bro has a 71 Camaro that is a ongoing project, He also has a S-10 with a blown 4.3L with a T-56 that runs mid 12's at 100 plus in the 1/4. I have a 1994 S-10 that was my daily driver intill i wrecked it, now im going to do coil over on all 4 cornors, 18x7 and 18x12 combo, backhalf with 2x3 box tubing, link set up out back, and hammer it on the ground.
I went to Wyotech and took everyclass they offer besides Diesel and Auto Tech.
When i was there I took a 1947 Street Rod and installed new rockers, floors and made a triangle 4 link and did air ride.
Since i have been home i got a job at a custom shop (that what they called it) They really didnt have the know how to do the stuff so they were doing stuff three times to get it right. So my brother and i have started up a shop, so far we have done a 1962 Impala on air, custom set up. Debagged a S-10, and right now we have a 1959 Caddy, thats getting the a 1996 Impala SS front clip, LT1/tranny and rear end out of the SS, full air ride, vintage air set up, and much more.
I dont know if there is anyone around the Cincinnati area who builds custom cars, but im still looking for a day job, So if theres anyone looking for help let me know, willing to move.
Here is a few pic of our stuff and work
My 94 before i wrecked it.
62 Impala we did
Bros S-10
I have vids of bros truck runnin 12.6 at 104.
http://s-seriesforum.com/albums/vidi..._12_63_104.wmv
Thank you
Dan
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
New Member
It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Linear Mode
