Anyone with Fast Xfi..... quick question

[phillym5]

Im looking to see what color wires and what order they go into the IAC sensor. Mine were extended a long time ago.. and i have 3 reds going into the connector and 1 black. I want to make sure i dont have any backwards or something. I havent used the IAC because it never worked right...

I traced the wiring and found good connections to the colored wires... but cant find a diagram to make sure they are correct.

Should be red, blue, yellow, and black.

I upgraded to the 2.0.. and its been a nightmare trying to recalibrate all the new settings...... uuugggghhhh.

thanks.

[camcojb]

Originally Posted by phillym5

Im looking to see what color wires and what order they go into the IAC sensor. Mine were extended a long time ago.. and i have 3 reds going into the connector and 1 black. I want to make sure i dont have any backwards or something. I havent used the IAC because it never worked right...

I traced the wiring and found good connections to the colored wires... but cant find a diagram to make sure they are correct.

Should be red, blue, yellow, and black.

I upgraded to the 2.0.. and its been a nightmare trying to recalibrate all the new settings...... uuugggghhhh.

thanks.

late model IAC is

A red
B blue
C yellow
D black

[phillym5]

I got that... but what pin is a, b, c, and d supposed to be?

thanks.

[camcojb]

Originally Posted by phillym5

I got that... but what pin is a, b, c, and d supposed to be?

thanks.

that is what they're supposed to be. Maybe I don't understand your question. The A pin on the IAC should have the red wire from the ecu. The B pin should have the blue wire and so on. These wires come from the gray 25 pin harness, which also has the fuel pump, fan, and power adder harnesses.

[phillym5]

Ok... maybe i didn't see the letters on the connector. I'll take another peak...
thanks!!

[camcojb]

Originally Posted by phillym5

Ok... maybe i didn't see the letters on the connector. I'll take another peak...
thanks!!

the letters will be on the connector and the IAC. Get your glasses or magnifying glass, they're small..........

[phillym5]

Originally Posted by camcojb

the letters will be on the connector and the IAC. Get your glasses or magnifying glass, they're small..........

Your right!!
Thanks!!

[camcojb]

Originally Posted by phillym5

Your right!!
Thanks!!

you're welcome.

[phillym5]

Dang... It's all wired right. I was hoping it was wrong and it would solve the issue!! O well.

Thanks again!!

[camcojb]

Originally Posted by phillym5

Dang... It's all wired right. I was hoping it was wrong and it would solve the issue!! O well.

Thanks again!!

what is the problem?