C5/6 Billet Aluminum Front Hubs

[MillerBuilt]

Item Location (City/State):Mesa AZ

Price: $600 +shipping

Description: C5/6 Corvette Billet Aluminum Front Hubs



[IMG][/IMG]



Benefits:

Lighter than stock C5 hub by 1.7 pounds
Opens up wheel options compared to stock C5/6 units
Stronger than stock unit bearing hubs assemblies
100% Serviceable unlike stock hub assemblies
Corrosion resistant
Not Mass Manufactured
100% American Made

Features:

Aerospace Grade Material Construction
Non Corosive fasteners
Laser etched GMR part number on hub body
Laser etched GMR Serial Number on hub body
Dual bolt patterns 5×4.5 and 5×4.75
17-4 Stainless Fine thread 1/2″ wheel studs
Large Timken Tapered Roller Bearings


__________________

[raustinss]

Sold if they could work with stock c6
Z06 rotors

[MillerBuilt]

Originally Posted by raustinss

Sold if they could work with stock c6
Z06 rotors

Sorry, no one piece rotors on these. You could ditch the heavy 1 piece for 2 new rotor rings (Wilwood, Baer, Coleman, etc.) and bolt to these hubs/rotor adaptors that are included in the price....
Thanks for looking though

[raustinss]

The Z06 rotors are only going to be used until I get the funds for a ZR1 swap...good luck with the sale

[MillerBuilt]

Originally Posted by raustinss

The Z06 rotors are only going to be used until I get the funds for a ZR1 swap...good luck with the sale

Its not that it wont work because it will. The only issue is that you are adding additional track width (just under 1/2" per side) since your one piece rotors would mount over the hub just as this ZR1 mock up....

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[Matt@BOS]

Are these still available?

-Matt

[MillerBuilt]

Originally Posted by Matt.A

Are these still available?

-Matt

Yes sir. Let me know if you have any questions. Thanks, Jay

[raustinss]

So what is needed to use these with Z06 calipers and rotos then

[Matt@BOS]

Originally Posted by JSM

Yes sir. Let me know if you have any questions. Thanks, Jay

Ok, one question for you, Jay, just want to make sure I'm understanding this. Would an aftermarket C6 corvette brake kit bolt right up, with the same rotor placement, provided I bolt the rotors up to your hub adapter instead of using the hat supplied in the brake kit? In other words, if I have a Wilwood C6 brake kit can I simply install everything onto your hubs?

Thanks,
Matt

[MillerBuilt]

Originally Posted by raustinss

So what is needed to use these with Z06 calipers and rotos then

longer wheel studs, spacers between your steering knuckle caliper mounting lugs & your caliper (same as shims used by Wilwood/Baer/etc. to obtain perfect alignment over the rotor in their kits), and longer caliper bolts. If you want, I will tell you what wheel studs will cost, and I will install into your set of hubs. I can even figure the spacers & longer caliper bolts you will need for the ZO6 calipers as well and round up at cost as well. Let me know.