67-69 Camaro/Firebird & 68-74 Nova Front & Rear Suspension - Lateral-g Forums

DEIGuy38 · #1 12-02-2012, 08:02 PM

All of these parts have been used for mock up only. 0 miles on these parts. Except the arm themselves.

FRONT Suspension Parts
Stock upper and lower A arms sand blasted and painted with POR15 with:
• AFCO low friction greasable steel A arm bushings in the uppers and lowers. There is no preload on the arm like you have with rubber or urethane bushings.
• Upper bushings were little longer than stock. I machined the front bushings only to move the cross shaft forward which will build more caster into the arms with out using shims. Bushings are tacked into the arms to keep from slipping plus bolted in like stock.
• Howe Racing lower rebuildable ball joints with stock length shaft (have 2 extra shafts)
• Howe Racing upper rebuildable ball joints with ½” taller length shafts to help camber curve
• A Arms could use a repaint

Upper A Arms Parts cost $ 200.00 plus the arms, Will take $ 150.00 for the pair

Lower A Arms Parts cost $ 200.00 plus the arms, Will take $ 150.00 for the pair

Howe racing rebuildable outer tie rod ends with ½” taller length shafts to help with bump steer issues. Purchased from SC&C. Cost $ 195.00, Will take $ 150.00 for the pair

AFCO front coils springs 500# 5” dia. x 9.5” tall. Part # 20500. Cost $ 125.00 pair, Will take $ 80.00 for the pair

Reason for selling is I bought DSE Speed Kit 2 for the front and a Quadra link for the rear.

All prices DO NOT include shipping. Don't be affraid to make a reasonable offer!!

**califconstruct** · #2 12-03-2012, 06:24 AM

Pm sent on the sway bar.

JBROWN · #3 12-03-2012, 09:16 PM

Pm sent on the bushings.

DEIGuy38 · #4 12-03-2012, 09:36 PM

Both PMs replied to.

JBROWN · #5 12-04-2012, 08:55 AM

Money sent on the bushings.
Thanks Guy.

DEIGuy38 · #6 12-04-2012, 10:12 PM

Thank you Jeff, shipping out tomorrow.

DEIGuy38 · #7 12-05-2012, 10:01 PM

Swaybar sold.

DEIGuy38 · #8 12-18-2012, 09:06 PM

Lowered prices

DEIGuy38 · #9 12-28-2012, 02:15 PM

Lowered prices, need this stuff gone

**geberhard** · #10 12-29-2012, 01:08 AM

Guy I will take the pocket coil adjusters. Could you do $55 shipped? i am in norcal Bay area. Also any idea if the leaf springs will net some drop, and if so how much compared to stocks.

Thanks

Gui