1969 Camaro project for sale

[markaaron80]

Item Location (City/State):Macon,Ga

Price:$119k

Description:I have decided I would like a car that the whole family can ride in together. Wife,myself and 3 kids. I currently have a 2 door 1964 impala project that will get finished if the camaro sells.

Wanted trades would be for protouring or restomodded 2 door tri-5 Chevys (55-57)
Nomads are fine also.

2 door impala 1964 or earlier.

And possibly classic SUV type restomod vehicles (1978-1996) Bronco or 1970's and newer K5 Blazers.

Car is painted TEAL LATER (Dave Kindigs paint line by Akzo Nobel)(also have the KINDIG rear wing)and is being wired now by a buddy. He has the Digitails done, working on the AAW wiring kit and the Holley Terminator X Max with Holley 12.3" digital dash that is in a 70 Nova dash insert with 70 Nova dashpad. Painter will paint again after I pick up from wiring. I can have the painter add your stripe to the car with a deposit. I'm torn between leaving as is with no stripe, Z28 stripes, Hockey stripe or the DX-1 stripe over the nose and upthe hood. New front and rear bumpers, new carbon fiber strut/fender braces.

I WAS CONVINCED I WANTED MY CAR PAINTED TWICE, LIKE THEY DO ON GRAVEYARD CARS.

Sheetmetal is Original GM doors, NEW NOS GM front outer fenders($2800). AMD on rear quarters, roof,decklid,cowl hood,and inner fenders. Smoothed firewall.Has the Dynacorn 1 piece floor section from firewall to trunk with minitub cut outs. All sheet metal was replaced by MuscleCarMetal in New Hampshire($25k)

Heidts Pro-G front subframe with polished stainless steel control arms and Heidts Pro-G independent rear suspension (IRS) with ford 9" center section with 3:70 gear. subframe connectors. ($25k for front and rear)

New Crate LS3 (495 hp)- upgraded to BTR stage 4 NA cam, sheetmetal intake, stainless headers, Nick Williams 102mm throttle body, trunnion upgrade and ATI balancer. Holley fuel rails, Mcloed clutch.Should be around 600hp. Cold air kit from (FRANK) $1000

New T56 magnum
Power window
Gen 4 Vintage air conditioning and heat.
$500 Dakota digital A/C controller.
Raingear hidden wipers
Entropy aluminum radiator with dual spal fans.
Corbeau leather seats, TMI 1 piece headliner. Complete Deluxe interior kit new in boxes.
MoMo steering wheel.
Rick's Stainless fuel tank with Aeromotive pump.
3" polished 304 stainless exhaust with x pipe and mufflers.
Lizard skin on interior floors. Lizard skin (color matched) under car and inside wheel wells.
Minitubbed. I have the KINDIGIT rear laid down spoiler, front metal spoiler from SPOILERS BY RANDY.
Boze 18x10 with Michelin PS2 275/35/18
Boze 19x12 with Michelin PS2 345/30/19
Wheels & Tires $10k


I'm looking for $145k finished.
Less as is.
I do have a nice 24' enclosed trailer also if someone wanted a package deal. It's fully insulated, black seamless(screwless) aluminum exterior, AC and heat, finished interior with aluminum cabinets, lighting and speakers. Aluminum rims and exterior lights. (Valued @$15k)



As of right now the only thing im missing is new glass and driveshaft.

I do have original factory front bucket seats that need to be recovered, a factory original fender that go with car also. There is a backseat that has been fabbed to fit between minitubs also. I do have the DSE dash insert that I was going to use with Speedhut Gauges, but went with the Holley 12.3" dash instead. I have TMI center console and dash and 1 piece suede headliner. Fast LSXR102mm intake on it now ($1300) instead of the sheetmetal one. New Holley valvecovers with hidden coils.($600)

Will sell as is or trade as is for less $$
Located about 1 hour south of Atlanta, Ga.


Updated with more parts. Bumpers, Kindig wing, spoiler by Randy, carbon fiber fender braces, intake, valve covers etc...


$119k as is

Headed to a shop in February to finish. Will be for sale at any time. As progress happens, price will go up.

[markaaron80]

Car is currently at Paint getting Z28 stripes and will be finished to sell.