Well Im not a new member But here's my junk.

[badmatt]

My names Matthew Im from Manitoba Canada. frigid cold place..... in the winter
My project is an 86 S15 Its a Prostreet / Daily driven 8.50 legal truck. It is back halfed with ladder bar's, Mild steel 8 point roll cage, sits on 33x18.5 rear tires the new wheels will be comming soon Ive got a pair of prostars on it which i bought a year before the Billet Specialties Street Lites came out..

The power plant will be a simple modest 400 SBC with AFR 220CC heads Dart block, Lunati crank, Howards rods, Je slugs, My own sheet metal Intake, and a single 88MM Borg Warner turbo. A/W Intercooler and will be controlled by a BS3 and MSD ignition. And will be backed by a TH400.

all rite on to the pictures.

Heres when I first bought the truck 3 years ago. Was 16 at the time and bought it for $400


I back halfed it. and Installed the 8 point cage which made except for the main hoop.



Narrowed the diff my self did the back brace and all the welding ym self, yes some of the welds are ugly but i dont care it has penetration, Using a borrowed Jig, and after I borrowed the jig I made my own.


I sand blasted the front and middle section of the frame then painted it.


and yes the truck is rusty! other floor pans looks the same, cab corners have been replaced