M22 from a Chevelle - Perfect for an LS6

[eville]

This is the transmission you need if you're building an LS6.
I'm asking $2,200 plus shipping from 94579.

I've got a Muncie M22 that I've had in my 68 Camaro since 1993. Less than 2,000 miles ago I rebuilt it with the following:
- New input shaft (GM)
- New Synchros
- New dogs and rings
- New shift forks
- New Bearings

The box is in great shape. I've never abused it. It shifts smooth.
I replaced it with a Tremec and don't need this tranny anymore.

Here's the info:

Main Case # - 3925661
Tailshaft # - 3978764
Side Cover # - 3952648

Stamped P0A16C - The best I can tell is:
P-Muncie
0 - 1970
A - January
16 - Sixteenth Day
C - M22

VIN is: 10K160434
The best I can tell is it's a 70 Chevelle. (Anyone know this car?)

Here's video of the internals:
http://s34.photobucket.com/albums/d1...t=MVI_1370.flv

and a few pictures

http://i34.photobucket.com/albums/d1...e/IMG_1349.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1362.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1366.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1356.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1355.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1353.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1351.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1369.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1372.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1376.jpg
http://i34.photobucket.com/albums/d1...e/IMG_1373.jpg

[Stuart Adams]

I would post it on the yenko.net site also. Rockcrusher and a 70 LS6 - good stuff.

[eville]

thanks for the idea!

[Autokraft]

Yep, what Stuart said. Yenko.net