widen quarter panels

[ekrock]

has anybody done it around here ? any info will be appreciated

[jonny51]

What kind of car?

[ekrock]

67 camaro running 345s and they stick out about 2.5 inches

[Vince@Meanstreets]

the best thing would be to go inwards,its alot cheaper.
I've widened a 2nd gen before. The rear panel and getting both sides square are the hardest parts.
A 67 would not be too bad to do. But your talking a 3" section.

[jonny51]

Originally Posted by Vince@MSperfab

the best thing would be to go inwards,its alot cheaper.
I've widened a 2nd gen before. The rear panel and getting both sides square are the hardest parts.
A 67 would not be too bad to do. But your talking a 3" section.

Yeah,just mini tub it.
http://www.detroitspeed.com/MiniTubKit10.html

[Payton King]

21st Century Street Machine has come up with a new mini-tub and they replace the stock frame rail with a mandrel bent one giving it more strength than the stock frame rail and it gives enough room for a 14 or 15 inch wide tire. ( how is that for one big run on) Give them a buzz. 704-243-1566

[ekrock]

thanks for the info. I will check with them