Shaved Firewall/Steering Column?

[John510]

My firewall is completely smooth and I need to drill the hole for the Steering column. Is there some sort of rubber grommet I can use or some other trim that can go there?

I have a swivel ball mount but its pretty big.

What are you guys with shaved firewalls doing around the steering column?

[cencalc6]

I believe Chris at JCG has something for that...

http://www.jcgrestorationandcustoms.com/parts/

[John510]

Thanks... Curious if there is some sort of rubber piece I can put in there so when I wash the engine water won't go in there.

[scherp69]

Have you looked at the Earl's Seals It grommets. They might work. http://www.holley.com/types/Seals-It...et%20Seals.asp I was thinking about using these on my steering column as I've also smoothed the firewall. I see that the biggest hole size is just over an inch, but I wonder if they would stretch enough to fit around the column.

[John510]

Nice those earls seals will work great for my wire harness hole. Thanks!

Not sure if its big enough for the column as its a few inches wide.

[Musclerodz]

Coulumn needs to be rigidly mounted, so if you do not use the swivel or something equivilent, you still need to make a bracket to hold the column rigid if just use a rubber grommet.

[Bad Bowtie]

Originally Posted by Musclerodz

Coulumn needs to be rigidly mounted, so if you do not use the swivel or something equivilent, you still need to make a bracket to hold the column rigid if just use a rubber grommet.

Like Mike said rigidly mounted, here is a seal that might be what your looking for

http://www.streetrodhq.com/detail/19...OUND_HOLE.html

[DEIGuy38]

here are a few

http://www.speedwaymotors.com/search...all-mount.html

[John510]

Thanks guys! Im going to order the one from streetrodhq. it looks like it will seal around the column really well.