...

Go Back   Lateral-g Forums > Classifieds > Parts for Sale
Reload this Page Forgeline ZX3R 18x10/18x12
User Name
Password



Reply
Page 1 of 3 1 23
 
Thread Tools Display Modes
  #1  
Old 09-18-2012, 08:46 PM
Vegas69's Avatar
Vegas69 Vegas69 is offline
Senior Member
  
Join Date: Dec 2006
Posts: 8,692
Thanks: 87
Thanked 215 Times in 120 Posts
Default Forgeline ZX3R 18x10/18x12
Up for sale are Payback's 2nd set of shoes along with a set of R888's. These are perfect for a mini tub Camaro with a DSE subframe.

Specs:

Front:
18x10
6.125 BS
Shaved Hat (Accomodates 13" C6 Wilwood setup/maybe slightly larger)
295/30/18

Rear:
18x12
5.4 BS
335/30/18

Breakdown of the wheel build (Retail):

18x10 $1012 a piece
18x12 $1042 a piece
Bolt on center cap (legal for road racing) $300
Brushed Lips $320
Inner halves powder coated $240
Titanium fasteners $400

Total: $5368

These wheels are NOT brand new. They have approx. 4,000 miles on them and have some misc. imperfections from use. They also have some light damage from mounting and dismounting and the front inner lips had a light rub but are perfectly servicable. You should be able to see some of the imperfections in the photos.

Asking $2895 INCLUDING SHIPPING to the lower 48. (Shipping will cost a fortune)





__________________
Todd
Last edited by Vegas69; 09-18-2012 at 08:49 PM.
Reply With Quote
  #2  
Old 09-18-2012, 08:52 PM
cencalc6 cencalc6 is offline
Senior Member
  
Join Date: Nov 2010
Location: Fresno Ca
Posts: 562
Thanks: 0
Thanked 0 Times in 0 Posts
Default
pm sent
Reply With Quote
  #3  
Old 09-19-2012, 07:59 AM
randy randy is offline
Senior Member
  
Join Date: Jan 2011
Posts: 1,041
Thanks: 3
Thanked 68 Times in 43 Posts
Default
can the outer portion be polished?
Reply With Quote
  #4  
Old 09-19-2012, 08:07 AM
firstgencam firstgencam is offline
Senior Member
  
Join Date: Jan 2010
Posts: 285
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Thats a steal!
__________________
67 RSSS Project "Mulligan" LS2 w/Kenne Bell
66 Chevelle Convertible
71 Chevelle BB Auto, Air
70 Nova Original Paint,71Nova 383 4spd,70Nova
66 Nova LS2 6spd
68 Bullrun Chevelle LS3 6spd
2006 Dodge Viper (The daily)
55 Nomad LS1 Auto
63 Vette "Project 63 Z06"
2006 Z06 SOLD
69 RS/SS Pro Touring Project "My 401K" SOLD
69RS/SS Pro Touring Project "In the Red" SOLD
69 Camaro "The Beater" SOLD to Mr. Stielow
Reply With Quote
  #5  
Old 09-19-2012, 08:13 AM
randy randy is offline
Senior Member
  
Join Date: Jan 2011
Posts: 1,041
Thanks: 3
Thanked 68 Times in 43 Posts
Default
i have a 67 with the dse quadralink and dse front suspension. If you can send me some close up pictures of the wheels and let me know if the lip can be polished or chromed.

Shipping to dallas, tx


You can PM me if need be. Very interested.
Reply With Quote
  #6  
Old 09-19-2012, 08:31 AM
camcojb's Avatar
camcojb camcojb is online now
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,251
Thanks: 6,729
Thanked 2,083 Times in 951 Posts
Default
Quote:
Originally Posted by randy View Post
can the outer portion be polished?
yes, the wheels can be disassembled and you polish the outer hoop and re-assemble.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #7  
Old 09-19-2012, 08:35 AM
Vegas69's Avatar
Vegas69 Vegas69 is offline
Senior Member
  
Join Date: Dec 2006
Posts: 8,692
Thanks: 87
Thanked 215 Times in 120 Posts
Default
I kit to reseal a 3 piece wheel is $65 from Forgeline. Do your own due diligence on polishing and chroming.
__________________
Todd
Reply With Quote
  #8  
Old 09-19-2012, 01:33 PM
randy randy is offline
Senior Member
  
Join Date: Jan 2011
Posts: 1,041
Thanks: 3
Thanked 68 Times in 43 Posts
Default
well i showed my buddy these wheels too. One of us might get them. I need more pictures please with the issues that you were stating. Any better pic on the car too? more pic the better
Reply With Quote
  #9  
Old 09-19-2012, 02:07 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,251
Thanks: 6,729
Thanked 2,083 Times in 951 Posts
Default
Quote:
Originally Posted by randy View Post
well i showed my buddy these wheels too. One of us might get them. I need more pictures please with the issues that you were stating. Any better pic on the car too? more pic the better
there's a couple pics of the car here:

https://lateral-g.net/forums/showthread.php4?t=37731
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #10  
Old 09-20-2012, 08:17 AM
califconstruct's Avatar
califconstruct califconstruct is offline
Lateral-g Supporting Member
  
Join Date: Mar 2012
Location: Hollister, CA
Posts: 417
Thanks: 8
Thanked 7 Times in 5 Posts
Default
PM sent.
Reply With Quote
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 08:49 AM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net