C Clip Eliminator Identify

[usa-69z]

Guys ive got a eaton posi (moser) 12 bolt rear with the big ford torino bearings/ends. It currently has drum brakes.

What im trying to work out is does it have c clips or eliminators fitted? I have removed the locking bolt and rod to move my axles in to get to c clips but axles dont move at all. They dont . The flange has the backing plate fitted with another plate over the top about 4mm thick. Is this an eliminator plate? it is all fitted from moser in 2009.

thanx, Gav
downunder

[intocarss]

If you're running Ford ends on the rear end housing, then the axle bearings are pressed onto the axles and the outer plates that bolt the axles to the housing is what holds the axles in.... NO C clips

Undo the four bolts on each side holding the axle outer bearing plates and remove axles

The ford ends eliminate GM style C clips

[usa-69z]

thankyou sir !

[Sieg]

This may answer your question Gav: http://www.moserengineering.com/comp...figurator.html

Scroll down on the options, bolt in prefered, C-clips $157.50 add.

JerDawgy beat me.........again.

[usa-69z]

yeah thanx guys,, once i had a closer look i worked it out.. ford ends on it means for 4 bolts to remove axles..


Gav

[intocarss]