A.C. vent install DSE Dash? - Lateral-g Forums

snappytravis · #1 07-11-2016, 07:03 PM

Just curious if there are any tricks to installing the drivers a.c. vent in a dse dash insert? I am thinking of cutting a hole the exact same size as the factory and would like to know how everyone attaches it to the back side of the dash? Thanks for the help...

Nine Ball · #2 07-11-2016, 10:00 PM

I used an aftermarket vent from Vintage Air. Cut the hole out carefully with a Dremel tool (with the flexible want attachment) and the reinforced cutting disks. I drilled tiny holes in the corners and played connect-the-dots. Pretty easy, just take your time.

Musclerodz · #3 07-11-2016, 10:22 PM

ditto

Richio1 · #4 07-13-2016, 03:51 PM

What Nine Ball said

snappytravis · #5 07-14-2016, 02:25 PM

Looks like the vintage air one is the way to go.. thanks for all the input guys, I will order one up!

**will69camaro** · #6 07-14-2016, 04:58 PM

What he said. I did a little different and added another a/c vent for driver priority cooling system...

snappytravis · #7 07-14-2016, 11:50 PM

Quote:

Originally Posted by will69camaro

What he said. I did a little different and added another a/c vent for driver priority cooling system...

Nice work..

**will69camaro** · #8 07-15-2016, 06:20 AM

Quote:

Originally Posted by snappytravis

Nice work..

Thanks. Oh and my vents are from Restomod air. Not sure if mounting is the same as the vintage air but same principle. Drilled the corners and connected the dots to make the hole.