Generic MAP and coolent temp sensor?

[jski67]

Hello,

I'm slowly gathering parts for my efi system and just picked up a used Commander 950 with the wide band option.

The only parts I'm missing from it are the Map sensor and the Coolent Temp sensor. Are these somewhat generic parts that I can pick up at my local parts store or do I have to order the Holley parts?

It's going on a n/a 454, so it's my understanding that I need a 1 bar map sensor...

Thanks,
Jason

[camcojb]

Originally Posted by jski67

Hello,

I'm slowly gathering parts for my efi system and just picked up a used Commander 950 with the wide band option.

The only parts I'm missing from it are the Map sensor and the Coolent Temp sensor. Are these somewhat generic parts that I can pick up at my local parts store or do I have to order the Holley parts?

It's going on a n/a 454, so it's my understanding that I need a 1 bar map sensor...

Thanks,
Jason

1 bar is correct for naturally aspirated. I have not used the Holley system, but most of the aftermarket units use GM sensors.

Jody

[ProTouring442]

Yeah, I just looked at mine, and they sure look like GM sensors to me!

Shiny Side Up!
Bill
'72 442 "Inamorata"
www.FQuick.com/ProTouring442

[jski67]

Thanks!

For future reference, Doug F. from Holley confirmed that they are GM TPI parts...

Jason