simple 91oct 355 builds?

[Majik16106]

Does anyone have or can link me to anyone who has done any decent 400+ hp pump gas 355 builds?

[Sales@Dutchboys]

Im building one right now....well mines going to be about 110What would you like to know? maybe I can help

[jamesg602]

If your looking for a combo here is one, sorry i don't know any builders
http://www.ryanscarpage.50megs.com/combos10.html

[cutlasskid]

http://airflowresearch.com/

[markss28]

Originally Posted by jamesg602

If your looking for a combo here is one, sorry i don't know any builders
http://www.ryanscarpage.50megs.com/combos10.html

looking on the link it shows that a 383 wiht 9.4:1 comp made over 500hp. Sounds very high for the kind of motor.

[Scotch]

Here's both 355 and 383 builds for 87-octane. Easy to duplicate- minimal fabrication required. Builds are identical except for stroke and piston (obviously).

http://www.compcams.com/Community/Ar...?ID=1945664039

Good quality parts and a well-researched combination makes for great power.

Honestly, there's not much vacuum at idle though. If that's not a big deal, this setup works great!

~SP~

[chicane]

I did one back in '98 with a Goodwrench 350. Paying close attention to the quench, via FelPro's 1010 rubber coated gasket, a set of 195cc TFS aluminum with cnc'd chambers, a Comp Cams XE series camshaft topped off with a Performer RPM Airgap and a Holley HP series 750... it netted 438hp on 87.

Then... CHP did a very similar build in Feburary 2001. 411hp on 87... with ease. With pretty much the same parts. Hummmmm Now if I could find a link to the actual article....

This is part of the series that stemmed from the Feb 2001 build. It was a cheaper build with different parts yet still netted 390/425. Change a part or three... and you could have 425+ hp and still keep it on the cheap.