Yet another 2nd Gen Camaro - Project/update

[gerno]

Originally Posted by syborg tt

The BFG KDW 295 is wider then most 315's so don't just read the numbers on the sidewalls. Another example is the 335 BFG is wider the 345 Michelin

Good point, I do need to compare the 3 tires I'm looking at to see the differences. I saw the comparison of 3 different tires in a post and it was amazing to me ho non-standard the sizing is.

[syborg tt]

Originally Posted by gerno

Good point, I do need to compare the 3 tires I'm looking at to see the differences. I saw the comparison of 3 different tires in a post and it was amazing to me ho non-standard the sizing is.

You mean this one - Yep the Middle tire was a 345 and the one on the right is a 295

[gerno]

Originally Posted by syborg tt

You mean this one - Yep the Middle tire was a 345 and the one on the right is a 295

That's the one

[gerno]

New front brakes are in. Unfortunately the Speedtech front end parts won't be here until Monday from installation but these are still nice to look at.

[markss28]

If u get the GTO and want to part it out. I have a friend needing a trans and I maybe interested in seats. Just a thought

[gerno]

That would have been good but the guy sold the GTO before I could get there.

[gerno]

Did a little more work this weekend. I built a bracket to mount the new fuel/axle vent in the location of the factory vent (or whatever it is). I also started to modify the front subframe for the coil overs. Hopefully the new front end parts will be in today from Speedtech so I can test fit everything soon.

[gerno]

Some new parts are in....

I have to say the quality of all the parts is top notch but the spindles especially are impressive to me.

[NorCal72]

Those are some nice looking parts!

[Flash68]

You're not messing around.