Recommendations for Hydraulic Clutch kit

[jocko124]

Originally Posted by Fluid Power

Please don't. I had 2 and ended up with a RAM unit. Tons better.

The Mcleod leaked right out of the box....Twice! I will give you the one I just took off if you enjoy that kind of punishment.

Seriously. They are junk.

I used a RAM unit that mounts using the stock bearing retainer. (TKO 600) Straight forward to install. Take a lot of measurements and then shim accordingly.

http://www.ramclutches.com/Products/...se_bearing.htm

Hope this helps. If you have any questions, ask away.

Darren

Thanks for the heads up Darren. I'll have to do some more research to see if RAM makes them for the Ford T-56 Magnums (vs the GM T-56's). I have the stock GM TO bearing which is supposed to be pretty reliable and is much less expensive than the McLeod---but it doesn't fit.