I have the shock mounts on the lowest bolts and I have my coil overs adjusted all the way down and the car still sits about 3" too high? Bolts are not snug so I know its not binding.
Do any of the other brackets on the 4 link adjust height or only pinion angle?
I need this baby lower!
__________________
68 Camaro "Bloodline". OZMO Twin DBW LS3 with TSP 231/236 cam, Speedtech frame, Ridetech coilovers, Chassisworks G Billet/Fab 9, Asanti 19's, Fesler brakes, Carbon Anvil everything, etc.
These things will help: windows, insulation, seats, trunk lid, bumpers, stereo, wiring, fuel tank, fuel, let the springs settle a little. When that's not enough there are quite a few threads around here on that very topic.
__________________ Steve Hayes
"Dust Off"
68 Camaro
Speed has never killed anyone. Suddenly becoming stationary, that's what gets you! "Jeremy Clarkson"
1) Support car by framerails
2) unbolt rear coilovers
3) raise rear end until you achieve the shock-manufacturer-recommended 13.25"-13.5" eye-to-eye measurement between upper mounting hole and lowest setting of lower hole
4) retake picture
Yeah, wait till you get the car together. The ride height will settle down as you drive it with all the weight on it. Don't judge it with an empty car.