Prodigy Bar

[Golden_pilot]

I bought a Prodigy Bar from Frank back in 2010, which I just got to putting on a couple months ago all to find out it doesn't have the right bushing for the bottom of the QA1 shocks or spacers for the top and bottom bolts. I have tried for the last two months to get Frank to send me the right parts but thats turning out to be a lost cause.
Would anyone know of the part number for the lower bushing where the QA1 connects to the Axle? If anyone has a couple pics that would help to.

Thanks

[pw2006]

Try calling Ridetech, they may be able to help.

[dhutton]

X2. Ridetch has all kinds of bushings etc listed on their website.

Don

[Vegas69]

It's really a Air Bar so I agree that Ridetech likely can help you. You can source it through QA1 and Allstar performance as well.

[Chassisworks]

Golden Pilot,
You may have a Ridtech Airbar or you may have a Chassisworks gBar. Frank sells both versions.

If your suspension looks like the one below I may be able to help you. If so, give me a call at the number below. Ext 247.

[Golden_pilot]

Thanks guys I did call Ridetech about a month ago but they said they don't deal with QA1 shocks and couldn't help me. It's the Ridetech airbar that I have. The top bushing which is 1/2" fits the bolt but slides back and forth so it needs spacers or a wider bushing and the bottom bushing which is 1/2" needs to be I believe 5/8 to fit the bottom bolt and possibly spacers but I'm not sure.

IMG_0993.jpg
IMG_0996.jpg

[brownz]

I have tried for the last two months to get Frank to send me the right parts but thats turning out to be a lost cause.


That sounds about right!!! I gave up on him a long time ago

I have been using Ride tech and I must say great customer service!