...

Go Back   Lateral-g Forums > Technical Discussions > EFI and Forced Induction
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-16-2022, 07:09 PM
Buick Motorsports's Avatar
Buick Motorsports Buick Motorsports is offline
Senior Member
 
Join Date: Aug 2005
Location: Winnipeg, Manitoba
Posts: 170
Thanks: 2
Thanked 1 Time in 1 Post
Default Need expertise on EFI conversion for a 406SBC

It's been a number of years since I posted. My 85 Buick Regal has been sitting for almost as many.

I finally have the time to get this car back out and on the road where it belongs!




The first thing I want to do is convert it from the 950fm mechanical carb. I want a self tuning system, i have no interest programming my tune.

I am gonna leave it at that general request for now.

I really look forward to hearing from your Guys!

Cheers,

Jason
__________________
Jason

Project No Mercy
85 Buick Regal

BUDGET BROKEN.....SO IS MY SPIRIT.....TILL SPRING!!!
Reply With Quote
  #2  
Old 04-17-2022, 06:24 AM
dhutton dhutton is offline
Senior Member
 
Join Date: Nov 2006
Location: Mountain Springs, Texas
Posts: 1,894
Thanks: 1,113
Thanked 487 Times in 268 Posts
Default

I would recommend a Holley Terminator and then get Andrew to remote tune it for you. I’ve had a few folks use him and they were very pleased. Andrewb70 on the forum.

Don
Reply With Quote
The Following 3 Users Say Thank You to dhutton For This Useful Post:
68454RS (04-17-2022), AMSOILGUY (10-27-2022), OLDFLM (04-20-2022)
  #3  
Old 04-17-2022, 11:48 AM
Buick Motorsports's Avatar
Buick Motorsports Buick Motorsports is offline
Senior Member
 
Join Date: Aug 2005
Location: Winnipeg, Manitoba
Posts: 170
Thanks: 2
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by dhutton View Post
I would recommend a Holley Terminator and then get Andrew to remote tune it for you. I’ve had a few folks use him and they were very pleased. Andrewb70 on the forum.

Don
Hi Don,

Thanks for giving me the reference! It's funny that you mention the Holley Terminator as I was doing a lot of reading last night and was looking at this:


It has been a while since I worked on a car, it seems with a little time and patience that I could get this done.

Cheers,

Jason
__________________
Jason

Project No Mercy
85 Buick Regal

BUDGET BROKEN.....SO IS MY SPIRIT.....TILL SPRING!!!
Reply With Quote
The Following User Says Thank You to Buick Motorsports For This Useful Post:
OLDFLM (04-20-2022)
  #4  
Old 04-17-2022, 02:06 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,925
Thanks: 5,778
Thanked 1,627 Times in 731 Posts
Default

From what I've heard directly from tuners, the Holley EFI self tuning is very good. One of them said "it's good enough to put tuners out of business". Of course the install and setup needs to be correct.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #5  
Old 04-17-2022, 02:18 PM
Buick Motorsports's Avatar
Buick Motorsports Buick Motorsports is offline
Senior Member
 
Join Date: Aug 2005
Location: Winnipeg, Manitoba
Posts: 170
Thanks: 2
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by camcojb View Post
From what I've heard directly from tuners, the Holley EFI self tuning is very good. One of them said "it's good enough to put tuners out of business". Of course the install and setup needs to be correct.
The instructions seem reasonably straight forward. I only have a couple concerns about the gas tank fittings, but that can wait till the I decide to purchase.

Jody, I remember you from my original stint on the site, You had the Stielow built Chevelle. That was and is a favorite of mine. Do you still have it?
__________________
Jason

Project No Mercy
85 Buick Regal

BUDGET BROKEN.....SO IS MY SPIRIT.....TILL SPRING!!!
Reply With Quote
  #6  
Old 04-18-2022, 01:35 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,925
Thanks: 5,778
Thanked 1,627 Times in 731 Posts
Default

Quote:
Originally Posted by Buick Motorsports View Post
The instructions seem reasonably straight forward. I only have a couple concerns about the gas tank fittings, but that can wait till the I decide to purchase.

Jody, I remember you from my original stint on the site, You had the Stielow built Chevelle. That was and is a favorite of mine. Do you still have it?
I do not. Great car, and the reason I'm doing another Chevelle right now. The 64 was the most comfortable fun to drive car I've ever had.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
The Following User Says Thank You to camcojb For This Useful Post:
AMSOILGUY (04-19-2022)
  #7  
Old 04-20-2022, 02:16 PM
OLDFLM's Avatar
OLDFLM OLDFLM is offline
Senior Member
 
Join Date: Jan 2008
Location: Orlando, FL
Posts: 1,365
Thanks: 167
Thanked 141 Times in 83 Posts
Default

Quote:
Originally Posted by Buick Motorsports View Post
The instructions seem reasonably straight forward. I only have a couple concerns about the gas tank fittings, but that can wait till the I decide to purchase.
1) Get the Terminator EFI
2) Call Carl at VaporWorx! He will help with your tank/pump etc.
3) Have Andrew tune it!

Exactly what I did for my 440cid Pontiac and it's the single best thing I've ever done to the car!
__________________
Ty Ingle, USAF Retired
FREEDOMBIRD
Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST
Reply With Quote
The Following 4 Users Say Thank You to OLDFLM For This Useful Post:
AMSOILGUY (10-27-2022), Buick Motorsports (04-20-2022), camcojb (04-20-2022), dhutton (04-20-2022)
  #8  
Old 04-20-2022, 05:31 PM
andrewb70's Avatar
andrewb70 andrewb70 is offline
Lateral-g Supporting Vendor
 
Join Date: Jul 2005
Posts: 916
Thanks: 248
Thanked 608 Times in 247 Posts
Default

Quote:
Originally Posted by camcojb View Post
From what I've heard directly from tuners, the Holley EFI self tuning is very good. One of them said "it's good enough to put tuners out of business". Of course the install and setup needs to be correct.
That's not entirely true. If it was, I wouldn't be in a business that is growing every month.

The Holley systems have a learn function, which is nothing more than a long term fuel trim table. There are still dozens of other parameters to sort through in order to have a great tune.

Andrew
__________________
Instagram @dr__efi
I offer remote Holley EFI tuning.
I deliver what EFI promises.
Please get in touch if I can be of service.
My YouTube Channel
Reply With Quote
  #9  
Old 04-20-2022, 07:41 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,925
Thanks: 5,778
Thanked 1,627 Times in 731 Posts
Default

Quote:
Originally Posted by andrewb70 View Post
That's not entirely true. If it was, I wouldn't be in a business that is growing every month.

The Holley systems have a learn function, which is nothing more than a long term fuel trim table. There are still dozens of other parameters to sort through in order to have a great tune.

Andrew
I understand, just that this tuner (who is well-known and respected) was impressed by their system. I don't think he literally meant it would eliminate his business, there are many factors in tuning as you know.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
The Following User Says Thank You to camcojb For This Useful Post:
andrewb70 (04-20-2022)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net