NEED HELP, Project: NOGO

[Young Gun]

ok heres the deal...Im not sure which to go with...so guys...give me your opinions!!!!

[bucks69]

#4 as first choice
#2 a distant second
IMO!!!!

[nasttee]

hope you dont think im being forward..being a new guy...
i think 3 minus the rear quarter stripe..the exhaust tip takes care of the rear.

[DVierstra]

Second and third YG. The reason being is they are different. Second reminds me of the Yenko graphic and the third because it is subtle. I believe, that if you ad a thin edge (but thicker than you have in #2) of white around the black graphics on both designs and possibly taper off towards the back of each graphic. As for number four...if you reshape the thick part of the back of the graphic to match the rear fender lines...would look very cool! Outline again with white.

That is my take. Good luck with your decisions.

DV

[Hdesign]

Looks like the shortened bumper idea is really getting popular for 3rd Gen Novas.

I think # 2 could be interesting with some tweaks.

I've been playing around with #4 for my own Nova, looks like it works well with the existing body lines.

[ZVT]

You know what I think Colin!!!As soon as you decide I will finish up the rendering with a few tweaks.

Is it me or did I make the plate off center???

[Hdesign]

No the position of the plate is fine, I would notch the underside of the bumper to the left of the plate though. The surface the place is mounted on is obviously pushed in and under the bumper it looks pretty accurate.