So I have built a few resto-mods in the past and just sold my twin turbo & supercharged Grand National and am ready to move on to my next project that will be my passion. As I'm getting older I have been really loving old trucks... So I thought I would spends a couple years building a 59 Chevy Apache with all Corvette C6 Grand Sport and ZR1 components.
I live in Arizona and sourced a good body.
The Following User Says Thank You to tdishon For This Useful Post:
I'm a couple months behind on this thread. I have it posted on a couple other sites and thought I would get up to speed here. I'm also in Peoria. Around 75th & 101
Drive train installed. Set engine back about 2", but torque tube still too short.
Fabbed up motor mounts to move engine back to clear blower pulley from rack.
Not that far away at all, I'm near 75th Ave and Happy Valley. Thinking of running up to Gateway Classic Cars Cars-N-Coffee this Saturday morning for a bit.
Chassis looks fantastic!!
__________________
Lance
1985 Monte Carlo SS Street Car
Do you have more pictures of the front cradle mounts? I happen to be getting ready to do a C6 from on my 57, and I was wondering if the cradle would fit.
Do you have more pictures of the front cradle mounts? I happen to be getting ready to do a C6 from on my 57, and I was wondering if the cradle would fit.
Dobbertin has a lot of good dimensional information on his website. I’m going to use his adaptors on my 56 Cameo.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
59 Apache/C6 Corvette build
Hybrid Mode
