Hey everyone. My name is philo and I've got a 64 Rambler Classic 550 2 Door Post. It still has the 196 six/BW slush o matic but that will come out as soon as I build new rear suspention. Plans are:
302 Ford / T5 (carbed now but FI after it runs and drives)
9" rear with a torque link
shaved door handles
17 inch wheels (as wide as I can get away with)
11" or bigger disk brakes (MII with 11" rotors most likely)
Fuel cell
HID lights
Maybe more
I got a 9" truck rear end to cut down! Going to get a set of 31 spline moser axles and FRPP 11" disk kit. Gotta find some 98+ Crown Vic spindles for the front. 12.4" front and 11" rear disks should stop a ~2700 pound car reasonably well.
i have a great idea for you..since you already have the panhard//spring setup go back with that on the 9 inch. juts get 4 bushed ends and some control arm tubes like mine and put a bracket setup on the frame forward of the rear end mounted to the inside of the rail to attach the control arm..looks like a straight shot forward...you have a nice pic of the same spot i used(right before the motor shots) on the otherside of the lift boxes...good strong. place it works.
you have less work to do your rear end setup than mine was...
nice clean rust free under body....
have anymore ramblers laying around like that?
Just for my learning! What front suspension are you using? I saw you mention Crown Vic spindles, you going to run Crown Vic front suspension? Just seems to me to be really wide.
Also, that is an interesting looking stock rear suspension setup. It almost resembles a center-drive truckarm setup if I'm looking at the pics correctly.
I love seeing the less popular cars get some attention - Keep us updated!
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
New Guy / Project: Philo / 64 Rambler
philofab
Hybrid Mode
