Well I have kind of lost some of my motivation so I'm posting some of my project pics hoping a few comments will give me that motivation back.
here is a few pictures of what I started with. It's nothing High dollar like most of the project posts on here.
Ok, I started with the engine and engine bay. First time I have done any project this big. So I had no clue on where to start. So I started with what I knew best the engine.
after I cleaned everything up this is what the subframe and firewall look like.
Looks pretty good, keep doing what you're doing. What are your plans for it? Once you get going you will realize that you can do much more than you thought. I'm up to my neck in Rusty metal, but I have found that if I separate everything into smaller sections, things start to happen.
Well right now I have a TCI streetfighter Turbo350 that was laying around so I'm going to use that for now. Ultimate goal would be to put a 5 speed in it.
Well right now I have a TCI streetfighter Turbo350 that was laying around so I'm going to use that for now. Ultimate goal would be to put a 5 speed in it.