Paint for subframe

[RdHuggr68]

I am ready to paint my subframe and I am searching for a durable paint that can withstand heat, grease, etc. I can't powdercoat due to some body filler used to smooth out a few areas. Thanks

[dhutton]

Three coats of SPI black epoxy.

Southernpolyurethanes.com

Don

[RdHuggr68]

I had painted the underside of my car in Aug 2017 with SPI black epoxy. I received a gallon in July2017 along with the activator. Wondering if it still good, it has been in the cabinet since we used it in Aug. 17.

[dhutton]

Should be ok but give it a good stir to make sure pigment hasn’t separate. Activator will be ok.

Any doubts mix up a small amount and do a spray out test panel.

Don

[RdHuggr68]

Originally Posted by dhutton

Should be ok but give it a good stir to make sure pigment hasn’t separate. Activator will be ok.

Any doubts mix up a small amount and do a spray out test panel.

Don

Don, I called SPI and they said same thing, "As long as it hasn't separated epoxy should be good". They also added you should flip paint can every 3 months to assure no separation. Thanks for your help!

[RdHuggr68]

I called SPI again and asked about the shelf life of the Activator. They said once you open the activator it is good for 1 year.

[minendrews68]

Originally Posted by RdHuggr68

I am ready to paint my subframe and I am searching for a durable paint that can withstand heat, grease, etc. I can't powdercoat due to some body filler used to smooth out a few areas. Thanks

When I powder coated the rearend of my Camaro, I too did some body filler smoothing. I used the filler that had aluminum flakes in it. The powder coater told me he didn't know if it would work, but I told him to go ahead and we'll see. He did and its been several years and it still looks as good as it did in the beginning. So, I'd have to say using the filler worked quite well.

[Ketzer]

Originally Posted by RdHuggr68

I am ready to paint my subframe and I am searching for a durable paint that can withstand heat, grease, etc. I can't powdercoat due to some body filler used to smooth out a few areas. Thanks

There is a specific filler, Lab Metal, thats used for powder coating... I know it doesnt help now, but for future reference.


Jeff-

[RdHuggr68]

Subframe is sprayed with SPI black epoxy, ready to make this Camaro a roller again.

[Sonar Chief]

Kevin, that looks soooo much better than the first attempt, let me know if you need help putting it back together!