Bolt Size?

[Spiffav8]

Anyone happen to have or know of a list that has all the bolt sizes used on the front end of a 67 Camaro? I plan on running stainless hardware and need the sizes so I can order everything.

Thanks!

[trevor572]

Hi. NPD have a few master body hardware kits for gen 1 cars in stainless, different head styles etc. It gives a list of the areas it covers, does like trunk hinges and a bit of other stuff around the rear also. Cheers.

[Spiffav8]

Originally Posted by trevor572

Hi. NPD have a few master body hardware kits for gen 1 cars in stainless, different head styles etc. It gives a list of the areas it covers, does like trunk hinges and a bit of other stuff around the rear also. Cheers.

Those are some nice kits, but....they don't fill my needs. I just need the sizes. There has to be a list somewhere.

[trevor572]

I know I did buy a front hardware kit from Ricks that came with a list of what size bolts went where if memory serves me correct, I know it was still in the box with some left overs. I did send it with the car when Chris was doing the body and paint, I have got it at home again and I will check tonight to see if I still have that list there and get back to you mate. Cheers Trevor.

[GTWayne]

I want to say ATK sells kits with a very detailed list of sizes for most autos.

[Musclerodz]

There is not a "list" per say. What SS bolts are you planning to run? I can get you the basics for a count. Totally stainless makes a kit but it does not have things like the clips and nut plates you need as well which are not available in stainless. If your planning to run ring brothers, or rad rides bolt, its gonna get expensive quick.

[Vince@Meanstreets]

Originally Posted by Spiffav8

Anyone happen to have or know of a list that has all the bolt sizes used on the front end of a 67 Camaro? I plan on running stainless hardware and need the sizes so I can order everything.

Thanks!

we did ARP's on a 68.

5/16" x 18 x 1" fender/sheet metal
5/16" x 18 x 3/4" fender/wheel houses
5/16" x 18 nuts fender/header panel
3/8" x 16 x 2" fender to body
3/8" x 16 x 1" hood hinges
5/8" x 11 x 3" frame to body
3/4" x 10 x 1 1/2" bumper bracket
3/4" x 10 nuts bumper bracket

[Spiffav8]

Originally Posted by Vince@MSperfab

we did ARP's on a 68.

5/16" x 18 x 1" fender/sheet metal
5/16" x 18 x 3/4" fender/wheel houses
5/16" x 18 nuts fender/header panel
3/8" x 16 x 2" fender to body
3/8" x 16 x 1" hood hinges
5/8" x 11 x 3" frame to body
3/4" x 10 x 1 1/2" bumper bracket
3/4" x 10 nuts bumper bracket

Vince! YOU ARE AWESOME! That's a good chunk of what I need.

THANK YOU!!!!!

[Vince@Meanstreets]

Originally Posted by Spiffav8

Vince! YOU ARE AWESOME! That's a good chunk of what I need.

THANK YOU!!!!!

no problem.... i don't have the bolt count with me but its a bunch of them.

[Spiffav8]

Originally Posted by Vince@MSperfab

no problem.... i don't have the bolt count with me but its a bunch of them.

I can count them up. Jeffs car is my garage for a few while he builds his shop.