Mounting GMPP harness fuse box?

[samckitt]

How are you mounting the fuse box?

Thanks

[randy]

anyone have any under dash mounting ideas? This would be for a 67 camaro

[Vince@Meanstreets]

Originally Posted by randy

anyone have any under dash mounting ideas? This would be for a 67 camaro

not much room under dash, especially if you have a Vintage air unit. We put them on the fender well near the factory battery location.

[Vega$69]

Originally Posted by Vince@MSperfab

not much room under dash, especially if you have a Vintage air unit. We put them on the fender well near the factory battery location.

X2. Same here. If you mount under dash access is extremely difficult to access.

I move battery to trunk and mount fuse box in OEM battery tray.

[randy]

I wouldn't mind it there the problem is the harness isn't long enough to then extend it inside the firewall so the wires come behind the engine.

how are you guys hiding the wires where they crossover from the fender to the engine?

[randy]

Another thought is to mount it above the glove box liner facing down. Make a plate that bolts under the dash pad that the fuse box mounts too. If i need to mess with a fuse i can just remove the top section of the glove box to access.

Another idea is to put it on the left of the glove box and cut a opening in the glove box