Multi process welder recommendations - Lateral-g Forums

Mad_Monte_Carlo · #1 08-29-2021, 12:03 AM

I've been using a Hobart Handler 135 110v MIG welder for quite some time now and want to step up to something 220v capable of welding up to about 3/8" and looking to add TIG to the mix. I'm looking to spend around $1000 give or take a $100 to $200. This one has caught my eye https://www.amazon.com/gp/product/B0...Q3KRZQB6&psc=1 but not necessarily married to the brand and would like your guys experience with any decent brand.

**camcojb** · #2 08-29-2021, 05:33 AM

Link doesn't work for me.

Mad_Monte_Carlo · #3 08-29-2021, 03:05 PM

I hope this one works.

https://www.amazon.com/gp/product/B0...Q3KRZQB6&psc=1

**MODO Innovations** · #4 08-30-2021, 07:59 PM

My 2 cents.
I think for your budget, this a good choice. The warranty looks pretty good.

You will also need another bottle of gas and regulator/flow meter for TIG. You may already be using solid wire for your welder now, but if not, you will need another bottle of gas for that too.

Mad_Monte_Carlo · #5 08-30-2021, 11:20 PM

Quote:

Originally Posted by MODO Innovations

My 2 cents.
I think for your budget, this a good choice. The warranty looks pretty good.

You will also need another bottle of gas and regulator/flow meter for TIG. You may already be using solid wire for your welder now, but if not, you will need another bottle of gas for that too.

I'm already set up with a bottle with solid wire so it would be just a matter of adding on for the TIG.

big_o · #6 08-31-2021, 12:24 AM

Quote:

Originally Posted by Mad_Monte_Carlo

I'm already set up with a bottle with solid wire so it would be just a matter of adding on for the TIG.

you will need another bottle for the tig welder, you should be running 100% argon on the tig. mig welder should be 75/25 argon/c02

craig510 · #7 08-31-2021, 12:26 AM

TIG requires pure Argon. Typically MIG uses argon/CO2 mix or straight CO2. One issue with the TIG you show is the lack of a foot pedal and it probably doesn’t have high frequency start and is DC only so you can’t do aluminum. I think you would be better off with a dedicated TIG machine and a dedicated MIG machine. You are probably going to need to spend at least $1600 for a TIG box and another grand on accessories.