Bunch of Camaro and Trans Am parts for sale - Lateral-g Forums

Birdman · #1 10-04-2007, 07:47 AM

I've got a bunch of parts from the 68 Camaro project that I can't use and also a bunch of random parts from other cars I've had through the years.

Flexplate from a 78 Trans Am with a W72 400. Great shape, teeth are in excellent shape, no warping. I own a 4-spd car now and have no use for anything automatic. $35 shipped on it.

Stock airlid and silencer off of a 98 Trans Am. Removed it from my 98 with 60k miles on it, still looks great. I was keeping it in case I ever went back to stock with the car, but who am I kidding.

$25 shipped (SOLD PENDING PAYMENT)

Hood hinges off of a 3rd gen Firebird. May be the same as a Camaro, but not sure. These came off of a 91 Firebird I parted out. They had good shocks on them when we removed them, but they have been sitting for a few years and I have no idea if they still work or not. $25 shipped.

ABS module off of a 99 Z28. A friend gave me a complete LS1 setup for the 68 Camaro and I don't have any use for the ABS module. $25 shipped.(SOLD PENDING PAYMENT)

Driver's side wheel flare off of a 79 Trans Am. Will fit 79-81 TAs - SOLD

Drilled/slotted front brake rotors for a 68 Camaro - SOLD

Birdman · #2 10-04-2007, 11:35 AM

I also have a Pontiac 400 block out of a 72 Bonneville. Needs work, might need a sleeve, but might not. It had a blown head gasket when I got it and water had gotten into the cylinders. The crank is trash (someone had whacked it with a hammer or something) and the pistons are toast, but the block seems to be good.

$100 takes it, local pick up only

Birdman · #3 10-06-2007, 01:22 PM

New brake calipers for 69 Camaro - SOLD

Rollcage for 67-68 Camaro. Might fit 69, once again I have no idea. It is a Jegs kit, so it is a box of tubes with a center hoop. Center hoop is tacked in the car right now, so I gotta grind it out, but it isn't fully welded, so it should be fine. $100, local pickup only!

K&N air filter out of a 96 Z34 Monte Carlo. I had it in the car for maybe 10k miles before it went to hell and I sued CarMax for selling me a POS. So now the filter has been on the shelf for a few years now. $15 shipped, might need a recharge, but is in great shape.

Stock flat hood off of a 67-68 Camaro. I have a 2" cowl to go on the Camaro, so this stock flat hood has got to go. It is in great shape and amazingly has no rust. Sits flat and no dents. $100 takes it, local pickup only.

1990 Camaro RS wheels - 16" flat spoke wheels, good shape with no rash, but they are dirty and need cleaning. Only one center cap with them. I had planned on using these on my S-10 project, but now they are in the way and I could use the money to fund the AirRide setup on the Camaro. $200 takes them, shipping extra.

I will also trade anything for a rear 8.5" 10-bolt axle for the car.

Birdman · #4 10-06-2007, 06:34 PM

I also have a set of 2" drop spindles - SOLD

Birdman · #5 10-08-2007, 12:54 PM

I'll also have a cowl panel up for sale in the next few days as well. Anvil has donated a carbon fiber one, so the steel one I have has got to go.

Birdman · #6 10-08-2007, 07:25 PM

And some more parts:

Barnes 6-stage Dry sump oil pump - good used condition. Could use a new cog, but they can be had for $50 from Speedway motors. New these things retail for over $1500. I have no use for it, got it in trade for some powdercoating and I could use the money for the Patriot Dream Camaro. $600 takes it, shipping extra.

Also have some alignment plates that I got with the car. - SOLD