Anyone run Stainless Works headers on Art Morrison subframe?

[69x22]

I have a 69 Camaro with a LS-1 engine and soon to be Art Morrison subframe, I was wandering if anyone has ran the stainless steel headers from Stainless Works with this chassis.

[TravisB]

Originally Posted by 69x22

I have a 69 Camaro with a LS-1 engine and soon to be Art Morrison subframe, I was wandering if anyone has ran the stainless steel headers from Stainless Works with this chassis.

I dont think it would be a problem....would be nice to check with one of the guys that had the headers already in a Aftermarket style sub to see what kind of steering clearnce you have. Why dont you use the AME headers?

[69x22]

They do not offer a Stainless steel header. Seems like the coating on regular steel headers fade after a couple of months of running.

[Bowtieracing]

Originally Posted by TravisB

I dont think it would be a problem....would be nice to check with one of the guys that had the headers already in a Aftermarket style sub to see what kind of steering clearnce you have...

I would be intrested too!!!

I have had one set of stainless works headers in my vette and sofar i havent seen a better quality heders. They do offer "wayne due" header - but i believe it wont work with AME or DSE sub ???

[dhutton]

I know that my AME headers are very close to the lower control arm mounting on my AME subframe so it seems unlikely that headers from someone else would fit.

Don

[Bowtieracing]

Stainless works would fit perfectly here as an sponsorin vender. I think there would be lots of good products to develope for pro touring / g machine cars.

[ProdigyCustoms]

So here are my thoughts. Since Stainless Works makes Wayne Due chassis headers, I think they will be damn close! My bet is you would not have to do anything, and put one whoppie in a tube or 2, which is easy since they are stainless and you can buy the exact materials the headers are built with.