Short Stroke LSX engine

[tgvettes]

Is there any short stroke factory crank for LS engines? I would like to build a modern version of a DZ302 based of a LS type engine. big bore short stroke.
As far as I have seen I think the difference between 4.8L, 5.3L, 5.7L and 6.0L
is basically same stroke different bore. So I assume aftermarkert crank is what I would have to do. Any input appreciated.


Tonny

[Vegas69]

Basing your business plan on taking cubic inches away from an engine would equal bankruptcy. I will be suprised if anybody has a destroker kit.

[gearheads78]

6.0 block with a 4.8 crank. Shift at 9800.

[tgvettes]

Gearhead you a right on 9800 redline sounds good to me
except I thought the 4.8 had same stroke as 5.3 and 5.7
Does anyone have a stroke/bore list for all the different factory LS engines

Tonny

[gearheads78]

Originally Posted by tgvettes

Gearhead you a right on 9800 redline sounds good to me
except I thought the 4.8 had same stroke as 5.3 and 5.7
Does anyone have a stroke/bore list for all the different factory LS engines

Tonny

4.8 = 3.27 vs 5.3 = 3.62 not sure if the bearing saddles are the same or not

http://www.mortec.com/borstrok.htm

[clill]

for future reference it is DZ 302, not DC.