What is your oil preasure? What type of cam shaft, flat or roller? Crate engine or fresh rebuild? If it is a crate motor call the supplier and do as they say. Where is your oil preasure gauge attched to the engine and have you verified the accuracy of the gauge?
__________________
Ted Rea
"Don't drive FASTER than your guardian angel can fly"
The motor is a fresh rebuild, I guess. I got the long block from chevy. The oil pressure needle is 3-4mm from the H. I will find out more information...My bad for not having the information
The motor is a fresh rebuild, I guess. I got the long block from chevy. The oil pressure needle is 3-4mm from the H. I will find out more information...My bad for not having the information
first thing, get a mechanical gauge that reads in true psi, and see where you are. There may not even be an issue, but with any oil pressure delima I always start by verifying with another gauge. Since you're using one that doesn't even read psi, you definitely need to start there.
first thing, get a mechanical gauge that reads in true psi, and see where you are. There may not even be an issue, but with any oil pressure delima I always start by verifying with another gauge. Since you're using one that doesn't even read psi, you definitely need to start there.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
350 break in question
Hybrid Mode
