My Project car came just as a shell and nothing more. After seeing another member sell speaker boxes Ive decided Im also going to offer some. Heres the workings of a 10in rear sub box. This is the early stage of fiberglass work. But it gives you a basic idea of what Im after. The box will fit in the corner and is form fit that way it doesnt take up much trunk space.
Next Ill be working on kick panels up front. Problem is my car has no interior so Im not sure whats in the driver and passenger side area's. Heres a picture of what Im talking about. If some one can shoot me a pic of this area it would help a lot.
to the kick panel. You will not get away with much more than about 1 or 1.5 inches from the inner structure of the cowl.
Not sure if you can see much from these pics. I will get some more if you like. I put 5.25 in the cowl area and where the vent controls were on the kick panel, cut those out and mounted tweeters.
Last edited by Payton King; 12-03-2010 at 11:39 AM.
Heres what I have so far. Its just the inner structure so it not much to look at. This just shows how I used the area and got my air space. As soon as I test these in a car with a ebrake Ill finish em.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
68 Camaro owners I need some help.
Hybrid Mode
