69 Camaro brake pedal movement - Lateral-g Forums

bearcat · #1 10-02-2010, 02:19 PM

My brake pedal has some lateral movement and doesn't hit the switch square when you release the brakes. The retainer clip and spring and everything is there correctly. Is there something I can do to stop the lateral movement?
It moves 1/2 to 3/4 inch or so.

**GregWeld** · #2 10-02-2010, 07:56 PM

Bushings are probably shot... They sell a rebuild kit for that.

Vegas69 · #3 10-02-2010, 10:57 PM

If your set up is like mine, you need to take some washers and shim the clutch pedal shaft until the slop is mostly gone.

bearcat · #4 10-04-2010, 08:48 PM

I've seen a photo that shows a plate that helps guide the pedal towards the brake light switch. I don't have that. Is it needed? Not sure if that was someones mod or not.