Rear 9" assembly help

[John510]

Fab 9 rear with Moser axles (big ford ends)

First time putting one together sorry for the dumb questions.

Should my axle bearings be sticking out 1/8"?

Once the axles are in Im assuming the c-clips bolt to the housing to hold the axles in right? What holds the brakes on?

[youthpastor]

Originally Posted by John510

Fab 9 rear with Moser axles (big ford ends)

First time putting one together sorry for the dumb questions.

Should my axle bearings be sticking out 1/8"?

Once the axles are in Im assuming the c-clips bolt to the housing to hold the axles in right? What holds the brakes on?

Yep that is correct about an 1/8. What brakes do you have? Normally Baer brakes and others use the axle retainer as the backing plate, you ditch the 4 hole retainer and use the backing plate- hope that helps John

[John510]

Originally Posted by youthpastor

Yep that is correct about an 1/8. What brakes do you have? Normally Baer brakes and others use the axle retainer as the backing plate, you ditch the 4 hole retainer and use the backing plate- hope that helps John

I have Baer 6S for the rear. Ill open that box today and see if there is instructions.

Thanks

[Ron in SoCal]

John - PM me and I'll get you there...

[John510]

Hey guys do I need the 1/2" or the 3/8" T-bolts for my housing ends?

Was trying to order some but not sure which size I need. Thanks for the help.

[Ron in SoCal]

PM sent...