about to pull the trigger on a media blasting

[Jgpclone]

im about to pull the trigger on a media blasting place has any one hear of this place A&M sandblasting in Chatsworth im wondering if they have reasonable prices im planing to do my whole body shell inside outside and the undercarriage and dose any one know another place in the sfv thanx
btw its a 1969 camaro if it help in any way

[LSX67]

What type of blasting media do they use? That effects the price greatly.

[67 LS1 Vert]

dont let them do the flat panels...roof top, door sides, quarters, hood, deck lid. Only around the edges. It will cause warping on the flat parts. strip or sand it off by hand or machine. Usually is cost about 80 to 100 per hr. To do the whole car underside, inside, and around the out side panels... about 6.5 to 8 hrs.

[Jgpclone]

Originally Posted by 67 LS1 Vert

dont let them do the flat panels...roof top, door sides, quarters, hood, deck lid. Only around the edges. It will cause warping on the flat parts. strip or sand it off by hand or machine. Usually is cost about 80 to 100 per hr. To do the whole car underside, inside, and around the out side panels... about 6.5 to 8 hrs.

thanx for the info so u think paint striper and sanding would be my best bet

[Jgpclone]

so i started to use paint stripper man it made it so easy and saved some cash for parts .im just going to have them to do the undercarriage and the inside of the car

[John510]

I had my whole car blasted with Garnett media and it did not warp.

[Jgpclone]

Originally Posted by LSX67

What type of blasting media do they use? That effects the price greatly.

not sure what exactly what type they do use im trying to see whats my best bet in dong this procedure