Holohan HotRod shop Tru-Ovals Punches

[coolwelder62]

I just got my full set of Tru-Ovals punch's & die's from Dan Holohan.Man are these thing's First Class.I cant wait to start making part's for the chevelle.Dan sent me everything he thought I might need such as the hole bit for drilling the thur holesJoe Gibbs spray lube,pilot drills.Dan is very knowledgable and gave some tips to making work better and last longer.Well Worth the money.

[Lowfast]

So these both cut and form the metal? What does set like this run? Coll stuff can't waiot to see what you form with them.

[coolwelder62]

I have around $1700.00 invested in the whole set w/shipping.Will be using them in the next few day's.I will post up photos as soon as I have some panels.You can buy just one punch & die to fit your budget.Give Dan a call he is super easy to deal with.And really know's his Stuff. They do punch and flare the hole at the same time.

[radrambler]

Scott

Let the punch and flaring begin!!
That Holohan comes up with some great stuff !

Tom

[coolwelder62]

Today I took a few minute's during Lunch to do a test panel.I tried the smaller of the Tru-Oval's.It's a pc. of 18ga,Cold Roll.The lay out was easy W/ the lay-out top's Dan made up.Then I used a little Joe Gibb's spray lube & 1/4 18V impact Bazingz.!!!!!!!! I am also using a prototype dimple Tool Dan sent me.It make's Small dimple's In size's from 3/16 to 1/2.I did them in Inies outies.Let Dan know what you Think.Thank's DAN,

[waynieZ]

They look like they work nice. They could put some nice accents on someones build. nice work.