LS3 In My 1968 Camaro

[paulk68]

http://paceperformance.com/i-7739382...te-engine.html

I am looking at this engine for my 1968 camaro. I have been reading and reading and reading and i think i am making myself even more confused. Does anyone have a list of parts that will be needed for this swap. I basically have just a shell of a camaro so i know i will need new gas tank, new fuel lines, new motor mounts. New wiring but does anyone have an up to date list of parts that make this swap a little easier? do i really need a new gas pedal for this install?? thank you very much i might be in over my head LOL

[MaxHarvard]

You will need the pedal for the LS3. There have been a few wired throttle body conversions, but always check with the ECM to see what is required.

Usually the LS3 is DBW.

You'll need:

Headers
Fuel tank modification
Pump/regulator
Fittings
motor mounts
wiring harness for LS3

and a few other things I'm missing, but that's the gist of it.

[72Z/28]

-accessory drive either F-body style or corvette accessory drive. I believe if you go with F-body style you will most likely notch the frame.

-Driveshaft modification is required.

[PTAddict]

You will need a Engine Control Unit (ECU) and associated wiring harness. There are multiple aftermarket options here, but the least expensive is the GM ECU/harness, which also includes the necessary electronic throttle pedal. Link:

http://paceperformance.com/i-7788424...s-sensors.html

[gnx7]

You could run a different computer and keep it a cable TB if you wanted to.
I run the Holley HP and am loving it. No more tuners

[Timberline]

Plan on running the same in my Nova. Don't forget the reverse flow radiator.