What's works for cutting brake line tubing made of Cu/Ni?

[sleepertime]

What are some of the ways that are used to cut 3/16" Cu/Ni tubing used for the brake lines?

[GregWeld]

A tubing cutter.... these lines don't work harden like Stainless Steel does.

You could also use a cut off wheel on a die grinder... or a body saw...

But a tubing cutter would work just perfectly.

[Sieg]

Cu/Ni works like butter. A small tubing cutter works great

[sleepertime]

Great, Thanks for the replies I have lots of experience with SS tubing from 1/2", 3/8" and 1/4" in a chemical plant setting, but nothing like this. I do have a nice rigid tubing cutter that works on these sizes. If I try the tubing cutter method would you recommend getting a mini cutter?

[Sieg]

I used an Empire 1/8"-7/8" mini, it work perfect.........you'll be surprised how pleasant it is to work with. Buff it with 0000 steel wool and it has a very nice patina.

[Evaporate]

^Clean lines!