1969 Camaro Headliner - Lateral-g Forums

**tubbed69** · #1 06-22-2013, 07:26 AM

I have done 4 headliners in 69s and they all were PUI and they have had the same issue.on the last bow to the rear the material has a bad area in the center and just wondering if anyone knows of any better brands that have better quality?

RECOVERY ROOM · #2 06-22-2013, 04:47 PM

What has been the problem? Just curious

**tubbed69** · #3 06-22-2013, 06:28 PM

Quote:

Originally Posted by RECOVERY ROOM

What has been the problem? Just curious

the last seem towards the rear in the center has one side stretched tight and the other side has a little slack in it and it will not stretch out,I will try to get some pics

Musclerodz · #4 06-23-2013, 09:38 PM

I just did one over the weekend and had a similar issue. I am pretty certain the issue is with the listing being too loose. It will not let you pull an even stretch. Steamer helps alot, but still had a small wrinkle when I finished.

**tubbed69** · #5 06-24-2013, 03:23 AM

Quote:

Originally Posted by Musclerodz

I just did one over the weekend and had a similar issue. I am pretty certain the issue is with the listing being too loose. It will not let you pull an even stretch. Steamer helps alot, but still had a small wrinkle when I finished.

thanks,I hate that you had the same issue,it just wont let you pull the last section tight enough and leaves that spot in the center,could be worse but I really want a nice job

coolclassiccars · #6 06-24-2013, 04:19 AM

well since were on the topic anyone know where to purchase a good steamer.been using a heat gun on most of the headliners , but was thinking of getn a steamer.thanks shawn