Best oil pan to use on DSE subframe

[Swain]

Running a DSE sub. On my 68 camaro
Not using their set back plates. Stock LS3 pan will not clear.

What's everyone running?
Thanks

[Musclerodz]

Gonna have to use a Holley or Mast pan if you want a cast pan, or Canton if your willing to go steel. The LS3 crate motor pan just barely clears with the set back mounts.

[Swain]

Originally Posted by Musclerodz

Gonna have to use a Holley or Mast pan if you want a cast pan, or Canton if your willing to go steel. The LS3 crate motor pan just barely clears with the set back mounts.

Ya I also have a milodon. But didn't really want to run a remote oil filter. Guess I'll have to if I keep it.

I'll look into a Mast pan too thanks for the info

[Musclerodz]

Originally Posted by Swain

Ya I also have a milodon. But didn't really want to run a remote oil filter. Guess I'll have to if I keep it.

I'll look into a Mast pan too thanks for the info

canton does not use a remote filter.

[Efi69Cam]

according to the information DSE has here: http://detroitspeed.com/1967-1969-F-...-subframe.html

Both of their mounts should clear the C6 pan.

Have you tried to install the engine with the c6 pan and found it does not clear?

[Swain]

Says you need the set back mounts I have them but my shifter sits too far back I didn't like it so I put the normal ones back in

Originally Posted by Efi69Cam

according to the information DSE has here: http://detroitspeed.com/1967-1969-F-...-subframe.html

Both of their mounts should clear the C6 pan.

Have you tried to install the engine with the c6 pan and found it does not clear?