Hub-to-hub width of RideTech vs SpeedTech vs stock?

[frojoe]

Can anyone tell me the hub-to-hub width (not including rotor hat thickness) of the complete Ridetech front end with their tall spindles vs. Speedtech w/ ATS spindles vs the stock drum spindle width of 59"?

Thanks!
joe

[Chassisworks]

Hey Joe, long time no talk. Last time I checked the stock hub width was 60", the same as the Camaro. That's why we build our clip that width.

[frojoe]

Thanks for the quickly reply! I'm making some custom stuff and looking at current aftermarket uprights, but want to retain as close as possible my current hub-hub width with current wheels. So trying to figure which companies have what widths.

As far as I could read it's 59" hub flange to hub flange for drum spindles minus the thickness of the drum, and disc spindles minus discs are +9/16" thickness per side, so bringing that to total flange-to-flange stock disc setup as 60.125"

Maybe some direct input from Ridetech & Speedtech as to what they design their systems around would be awesome!

[Blake Foster]

I will get this tomorrow for you

[frojoe]

Any measurements from Blake or Bret?

Thanks!
Joe

[bret]

Not yet. Remember this is Thanksgiving weekend, when even the most hardcore of us are trying to stay away from the shop

I'll try to have someone get this info in the next couple of days.