...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Open Discussion
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 02-09-2014, 04:32 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,328
Thanks: 7,159
Thanked 2,185 Times in 1,008 Posts
Default Mark Stielow shared a link to some new Z28 pics

Mark Stielow sent us this link to what he's been doing the last week. Check out some very cool track photos of the new Z28.

http://carfanaticsblog.com/2014/02/0...-mega-gallery/

__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #2  
Old 02-09-2014, 04:42 PM
70 tt rustang's Avatar
70 tt rustang 70 tt rustang is offline
Senior Member
 
Join Date: Oct 2011
Posts: 138
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Wow very cool! Love the brake shot
Reply With Quote
  #3  
Old 02-09-2014, 04:54 PM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 8,034
Thanks: 33
Thanked 101 Times in 41 Posts
Default

Great images.

Still not in love with the styling lines but I'm certainly in love with the car!
Reply With Quote
  #4  
Old 02-09-2014, 07:45 PM
formula88's Avatar
formula88 formula88 is offline
Senior Member
 
Join Date: Dec 2006
Posts: 169
Thanks: 0
Thanked 8 Times in 7 Posts
Default

The Z28 was a great program to work on. Such a cool car. The handling and brakes are phenomenal!
__________________
Gordon
Reply With Quote
  #5  
Old 02-09-2014, 08:43 PM
glassman's Avatar
glassman glassman is offline
Lateral-g Supporting Member
 
Join Date: Apr 2012
Location: Livermore
Posts: 2,466
Thanks: 111
Thanked 84 Times in 62 Posts
Default

Quote:
Originally Posted by Sieg View Post
Great images.

Still not in love with the styling lines but I'm certainly in love with the car!
My thoughts precisely. I would love to see the belt line lowered 1.75 inches. But i still love this car...
__________________
Mike
Reply With Quote
  #6  
Old 02-09-2014, 08:47 PM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 8,034
Thanks: 33
Thanked 101 Times in 41 Posts
Default

Quote:
Originally Posted by glassman View Post
My thoughts precisely. I would love to see the belt line lowered 1.75 inches. But i still love this car...
It would be so nice to have one just to beat on at the track.
Reply With Quote
  #7  
Old 02-09-2014, 10:09 PM
Track Junky's Avatar
Track Junky Track Junky is offline
Senior Member
 
Join Date: Apr 2010
Posts: 3,469
Thanks: 2
Thanked 12 Times in 7 Posts
Default

Thanks for sharing. Love this car
__________________
Gaetano Cosentino
Reply With Quote
  #8  
Old 02-09-2014, 10:57 PM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 20 Times in 13 Posts
Default

why do I so agree with this picture?
Attached Images
 
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote
  #9  
Old 02-16-2014, 08:56 AM
MotorCityImpala's Avatar
MotorCityImpala MotorCityImpala is offline
Member
 
Join Date: Aug 2009
Location: Ocala, FL
Posts: 20
Thanks: 8
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by glassman View Post
My thoughts precisely. I would love to see the belt line lowered 1.75 inches. But i still love this car...
I agree as well. If it weren't for Crash standards that belt line would be lower. If you were to look at the backside of the interior door panel there is/are blocks of closed cell foam attached to the panel at shoulder height. All Mnfctrs are doing this. I am a former parts warehouse guy at the only Chevy dealer in the county (Marion Cty/Ocala, FL) and I handled all the warranty scrap. I left there 5 months ago. I is amazing what is going into cars these days.

I am waiting for GM/Chevrolet to reintroduce the ORIGINAL Z/24 RPO from back in 1967 that was an SS427 Impala. The NEW Impala is screaming for an LS7.
Reply With Quote
  #10  
Old 02-25-2014, 10:50 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,523
Thanks: 29
Thanked 2,296 Times in 619 Posts
Default More Z/28 info

Performance Traction Helps Camaro Z/28 Soar on Track

Z/28 Product Information
DETROIT – Engineers call it “flying car” logic. On the 2014 Chevrolet Camaro Z/28, the Performance Traction Management system delivers faster lap times on an undulating race track by helping maintain the car’s full power and momentum even if the tires briefly lose contact with the ground, in certain track conditions.

Created for track use only, the “flying car” logic woven into the Z/28’s standard PTM system integrates the chassis mode selection, Traction Control and Active Handling Systems. Each is tuned specifically in the Z/28 for optimal track performance and consistency, and is activated by the driver pressing a button in the center console.

Without “fly car logic”, the PTM would interpret the force reduction on the tires as a loss of traction and reduce torque to restore it. Such an intervention would likely slow the car and reduce momentum.

“PTM uses torque, lateral acceleration and rear-axle wheel slip to define the amount of traction control required, but when the car clears a rise on the track, it normally wants to decrease torque to increase traction,” said Bill Wise, Camaro Z/28 vehicle performance engineer.

“The unique logic in the system uses the ride-height sensors to determine the reduction in force on the tires that’s unique to track driving and allows the car to continue with uninterrupted momentum and, ultimately, a better lap time.”

Technologies such as PTM and the track-oriented logic helped the Camaro Z/28 log a lap on Germany’s legendary Nürburgring road course that was four seconds faster than the Camaro ZL1, and beat published times for the Porsche 911 Carrera S and the Lamborghini Murcielago LP640. The Flugplatz section of the Nürburgring has a rise that engaged the logic during the Z/28’s 7:37 lap time.

Additionally, PTM enables the driver to press the accelerator pedal to wide open at the exit of the corner and manages acceleration based on the given vehicle dynamics. Five performance levels, or modes, are available to accommodate a variety of driving conditions.

The track-oriented “flying car” logic is available in all PTM modes, but it is most effective in Mode 5, calibrated for the fastest lap times. The Z/28 represents the first non-Magnetic Ride Control application of PTM, pioneered on the Corvette ZR1 and incorporated in the Camaro ZL1. Engineers further refined it for the car on the road course at GM’s Milford Proving Ground in Michigan and on Virginia International Raceway and Road Atlanta.

Like the Flugplatz, a section of the Milford course proved particularly effective in calibrating the logic. It features a hill sandwiched between turns Pahrump 1 and 2, named for and based on a pair of challenging corners on the 3.4-mile-long road course at Spring Valley Motorsports Ranch, in Pahrump, Nev.

“The hill between Pahrumps 1 and 2 is ideal for testing the feature,” said Wise. “The car noticeably lifts as it clears the top of the rise. Without the logic built into PTM, the torque reduction would unnecessarily slow the car. With it, the car receives full torque over the rise, which helps reduce the lap time – and it is part of the reason why PTM Mode 5 can be as good, or better, than a driver’s best effort, on certain track conditions.”

Complementing PTM, the Z/28’s reflexes over rises and grip around corners are competition-derived spool-valve dampers, specific suspension bushings, coil springs and stabilizer bars, a unique zero-preload limited-slip differential and 19-inch wheels wrapped with Pirelli PZero Trofeo R motorsport-compound tires.

“The new Camaro Z/28 was bred on and for the track,” said Wise. “From the hardware bolted to the chassis to the software such as the “flying car” logic, every element built into it was designed to help deliver faster lap times, with consistency, control and dependability.”

Ready for the track
The 2014 Camaro Z/28 is the fastest Camaro ever on a track, with improved speed coming from three areas:

Increased grip: The Z/28 is capable of 1.08 g in cornering acceleration, due to comprehensive chassis revisions
Increased stopping power: The Z/28 features Brembo carbon ceramic brakes capable of 1.5 g in deceleration, and consistent brake feel, lap after lap
Reduced curb weight: The naturally aspirated Z/28 is 55 pounds lighter than the Camaro SS 1LE, with changes ranging from lightweight wheels to thinner rear-window glass.
Power comes from the 7.0L LS7 engine, rated at an SAE-certified 505 horsepower (376 kW) and 481 lb-ft of torque (652 Nm). A close-ratio six-speed manual transmission is the only transmission offered and power is distributed to the rear wheels via a limited-slip differential featuring a helical gear set, rather than traditional clutch packs, for optimal traction.
Attached Images
 
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net