2010 SS Camaro Leather Seats in 69 Camaro?

[69LS1SixSpeed]

I have a complete set front/rear that I would like to install in my 69 Pro-Touring Camaro. My question is has anyone installed the late model seats in a 69? I installed new carpet recently and just placed the front seats in the car....they seem a little high but I have to cut some of the tabs off to get the track flat on the floor. If anyone has pictures of an install to include a side view it would be appreciated! Thanks in advance for your assistance!

Chuck
Charlotte, NC

[snappytravis]

Did you ever have any luck on your seat project

[fishface]

I asked if anyone had done this on Pro Touring site several months ago. Crickets still chirping.

[jwcarguy]

Originally Posted by fishface

I asked if anyone had done this on Pro Touring site several months ago. Crickets still chirping.

I believe that a few people have tried the fifth gen seats in their car
I was even considering them when I did my 5th gen console, but the seats would sit way too high for me
The others had the same results when they tried too

Jeff

[dhutton]

I've got a set of Recaros out of a 2014 Z28 that I am going to try. They are such comfortable seats that I have to try to get them to fit. Might have to modify the seat pans to get them a little lower. I will post up some pics once I get them fitted.

Luckily I had to push the 6L90E high into the tunnel so the shifter is located well for high mounted seats and I am only 5'9"...

Don

[dhutton]

Originally Posted by dhutton

I've got a set of Recaros out of a 2014 Z28 that I am going to try. They are such comfortable seats that I have to try to get them to fit. Might have to modify the seat pans to get them a little lower. I will post up some pics once I get them fitted.

Luckily I had to push the 6L90E high into the tunnel so the shifter is located well for high mounted seats and I am only 5'9"...

Don

I mocked these up and it looks like they are going to fit. There is 3.5 inches clearance to the headliner. I modified the floor pans to accept the factory mounts. No power applied in these pics so the front is high. These seats are very comfortable.

Don

[syborg tt]

DSE did it in a 1st gen and I can't find the pics as my gallery is having issue's. I ill try to find them tomorrow.

[fishface]

This is a personal opinion so take it with a grain of salt. I am sure they are comfortable and functional but height and profile wise I feel they are a bit awkward looking. They kind of look like two people sitting in the car with those headrests.

[slimjim]

I'm following the same path on my 68 camaro, it seems to be getting more popular. I haven't begun installing them yet but here are some pics Ive found across the net.




There's also a very detailed build thread over on pro-touring.com worth following if you plan on doing this

[Randy crick]

Sent from my SAMSUNG-SM-G870A using Tapatalk