Ultimate Headers Announces New Long Tube Headers

[camcojb]

For 1st and 2nd Gen Camaros with the LS engines.

[andrewb70]

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew

[waynieZ]

That's the "most important question" Andrew

[pist0lpete]

321 Stainless sounds very nice!

[paulk68]

Originally Posted by andrewb70

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew

Agree, I would be happy to try them with the hooker LS mounts and ride tech Tru Turn system if you need a guinea pig

[camcojb]

Originally Posted by andrewb70

So the big question is what swap mounts were these designed for?

There seems to be quite a bit of variance in engine placement with the multitude of mounts that are available for LS swaps. This of course can cause all sorts of problems with header clearance.

They sure look nice though.

Andrew

I emailed them for an answer.

[camcojb]

Spoke with Jim, these particular headers are fit with the DSE subframes and mounts. There are going to be fitments for stock subframes and at that point they'll tell us what mounts they used for fitment.

[andrewb70]

They should include that important information in their flyer.

Andrew

[Dave95z28]

Beautiful headers. Wish they fit Speedtech's subframe. Would really like a 1 7/8" header versus the 1 3/4" or 2" options they have.

Dave