Yet another 70 Camaro build. I am new to lateral g and decided I would share my build hoping that some might share some insight on the build. I am building the car to be a good driver with intentions of autocrossing it every once in awhile. I purchased the car a little over a year ago so quite a bit has been done already. The car will be getting a ls motor with a 6 speed, Detroit speed Quadralink, 12 bolt, global west control arms and custom works performance front coil over conversion and many other of the usual parts.
Here is the car when I got it home. Has alot of issues it had been swung into a pole on the drivers side quarter they pulled out the quarter but the rear structure was left and both quarters are rusted out and also the trunk so it will be getting new gm rear sheet metal
Here are some pictures of it bare and with sheet metal going back on I already had cut for the mini tubs at this point once it got home I finished them up and its time for the Quadralink and mocking up the front suspension and motor and transmission.
__________________
1973 RS Z28, 401ci Dart Little M with AFR 227 comp porting heads, Callies Magnum crank, Lunati Pro Mod Rods, JE blower pistons @ 7.8:1, Littlefield 6-71 with 14 lbs boost, Reed solid FT cam with 240/250 duration @ .050", .523/.542" lift and a 112 LSA, T&D 1.6 shaft rockers, Lemons 1.875-2.0" step headers
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
70 Camaro Pro-Touring Yet Another One
It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Hybrid Mode
